Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Union City, CA
Finding a gate company in Union City means finding someone who understands what the bay air does to metal. Most repairs here fall into two buckets: rusted hinges and actuators that gave out after years of salty wind, or newer automation that was installed without accounting for a steep driveway’s grade. We’re Portcullis Gate Repair, and every job starts the same way: a written price before any work begins, a technician in uniform who shows up in the window we gave, and a 365-Day Done Right Promise in writing. Call (669) 800-5686 and a live person answers, day or night.
Why Union City Homes Are Different
Union City’s housing stock doesn’t fit one profile. A 1960s ranch off Alvarado-Niles Road might have an original ornamental iron gate that’s never been serviced, while a 1980s gated condo complex a few blocks east runs a Viking or FAAC operator that cycles dozens of times a day. The climate ties them together: persistent marine air off San Francisco Bay pushes salt into every bolt, hinge pin, and circuit board. We see rust blooming along weld points on iron gates within five to seven years, faster if the gate faces west toward the water.
The Decoto district has its own pattern. Many custom wrought-iron gates built there in the 1960s are now so corroded that hinge barrels seize and the gate won’t swing without grinding against the post. That’s not a Fremont problem, not at this scale. Hillside properties south of Whipple Road add another variable: steep driveways mean a gate that fails mid-cycle becomes a rolling hazard, and the automation has to work harder every opening. When we quote a job in Union City, those conditions shape the price and the parts we recommend.
Styles & brands we work with
Our Main Union City Services
Most Union City homeowners call us for one of three things: a gate that won’t open, a gate that’s sagging and grinding, or a new gate and operator planned from scratch. Each has its own page with local pricing and specifics.
Gate Repair in Union City
Rusted hinge pins, sagging leaves, cracked welds, a latch that no longer catches: most gate repair in Union City comes down to metal fatigue accelerated by marine air. We cut out rotted sections, weld in fresh steel, and re-hang leaves so they clear the ground by the right margin, which matters on the sloped driveways common in the Mission Highlands area. If your gate scrapes, sticks, or won’t stay latched, the fix usually starts with a service call and a written diagnosis. Gate Repair in Union City
Gate Installation in Union City
A new gate on a 1960s ranch or a 1980s condo entry has to match the property’s lines and stand up to the same salt air that ate the old one. We measure the opening, check the existing posts for rot or rust-through, and spec a gate that swings or slides clean on the terrain you actually have. Powder-coated steel and aluminum hold up better here than raw iron, and we walk you through that tradeoff with real numbers. Gate Installation in Union City
Electric Gate Repair in Union City
When an operator hums but the gate doesn’t move, or the remote stopped working overnight, it’s usually an actuator, a capacitor, or a photo-eye knocked out of alignment by wind. Union City’s moist air also gets into control boards and corrodes terminal connections, so we check every junction, not just the obvious part. We carry parts for the brands most common in Union City’s gated communities, which shortens the repair from days to hours. Electric Gate Repair in Union City
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Union City
We service the operators we see most often in Union City: Viking, FAAC, BFT, and Linear. Our trucks stock common boards, actuators, remotes, and photo-eyes for these systems, which means most repairs don’t wait on a parts shipment. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Union City, CA
| Service | Typical range in Union City |
|---|---|
| Hinge replacement (single gate) | $180 – $340 |
| Gate wheel replacement | $120 – $220 |
| Gate latch or lock repair | $95 – $180 |
| Welding repair (per section) | $150 – $300 |
| Wood gate sag repair | $140 – $260 |
| Actuator arm repair or replacement | $280 – $650 |
| Control board replacement | $240 – $540 |
| Photo-eye sensor replacement | $110 – $250 |
| Remote or keypad programming | $70 – $150 |
| Full operator/automation replacement | $900 – $2,400 |
| Aluminum gate replacement | $1,500 – $3,500 |
| Driveway gate installation (new) | $2,500 – $6,000+ |
In Union City, severe rust from bay air pushes welding and hinge jobs higher than the regional average because we’re cutting out and replacing more material. The price we quote is the price you pay: written down, agreed to, and locked before a single bolt is turned.
Neighborhoods We Serve in Union City
We cover all of Union City, including the older pockets where original iron gates are now forty to sixty years old and the newer developments where operators get constant use.
- Decoto
- Alvarado
- Mission Highlands
- Contempo
- Seventh Street area
Most Union City jobs can be scheduled within one to two business days, and emergency calls get a same-day visit when a live gate is stuck open or shut.
Service Area – Cities Near Union City
Beyond Union City’s borders, our crews regularly cover the neighboring communities. If you’re in a city nearby, you can find us through those pages as well: Fremont, CA, Newark, CA, Palo Alto, CA, and Mountain View, CA.
Serving Union City, CA - Our Local Coverage Area
We’re based in the Union City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Union City
In most cases, we schedule within one to two business days. An emergency where a gate is stuck open, stuck shut, or blocking a car from leaving gets a same-day visit. Call (669) 800-5686 and a live person answers, even overnight.
Most like-for-like gate replacements in Union City don’t require a building permit, but a new automated installation can trigger height, setback, and electrical requirements. We’ll check what applies to your specific property and factor that into the written quote.
Yes. Many of Union City’s 1980s gated condo communities run the same Viking, FAAC, and BFT operators we stock parts for. We work with HOA boards directly, provide a written scope and price before work starts, and back every repair with the same 365-Day Done Right Promise.
If your gate is grinding, rusting, sagging, or simply won’t open, call (669) 800-5686. You’ll get a live person, a straight answer, and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Union City Customers Say
"Hinge sheared off our heavy iron gate. They welded a new one on and it's sturdier than before. Showed up on time and cleaned the driveway after the welding."
- Rhonda Mikula"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw