Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Mountain View, CA
Mountain View gate work runs into two things more than anywhere else on the Peninsula: city code and damp winter air. The housing stock is mostly 1950s-70s ranches and newer zero-lot-line townhomes, which means narrow driveways, aging wood and iron swing gates, and a lot of repairs that need to respect very particular setback and height rules. We handle gate repair, gate installation, and electric gate repair here as a Kingswell company, and every job starts with a written price before any work begins. If your gate is sagging, stuck, or dead at the opener, call (669) 800-5686 and we’ll tell you exactly what it costs before we touch a bolt.
Why Mountain View Homes Are Different
Mountain View’s tech-driven housing market has produced a lot of high-end automated gates, but the city’s strictly enforced setback and height ordinances mean the work often isn’t a simple swap. A gate that clears code in Los Altos or Sunnyvale may need custom fabrication or a more discreet automation setup to pass inspection here. Add the Waverly Park and Blossom Valley tracts, where original 1960s redwood gates are failing on the same schedule because their 4×4 posts rot at the soil line, and you get a repair pattern that repeats every spring when the ground finally dries out.
The climate does its part, too. Mild but damp winters put rust into hinges and rot into wood posts. Dry summers then let under-braced gates sag until they drag on the driveway. Then a strong Delta breeze hits a tall solid-panel gate and you’re calling us because the corner post has pulled a half-inch out of true. Narrow driveways common to many Mountain View lots also push us toward compact slide-gate conversions rather than rebuilding a swing gate that never quite fit the space.
Styles & brands we work with
Our Main Mountain View Services
Three services cover nearly every call we take in Mountain View: repair for gates that have stopped working or started dragging, full installation for homes that need a new gate built to local code, and electric gate repair for openers, safety sensors, and control boards. Each has its own Mountain View page with local pricing and the full picture.
Gate Repair in Mountain View
Most Mountain View gate repairs are structural: a sagging leaf, a post that’s rotted at the soil line, a hinge that’s torn free from the wood. The climate here means rust and rot show up faster than homeowners expect, and by the time a gate drags on the concrete the post has usually been failing for months. We quote a written price, then do the carpentry or welding properly so the gate hangs square and swings clean. Details and local pricing are on the Gate Repair in Mountain View page.
Gate Installation in Mountain View
New gate installations in Mountain View start with the city, not the catalog. Height and setback rules, plus narrow lot lines, mean we often custom-fabricate rather than order a standard panel and hope it passes. We handle the full scope: post footings, the leaf or slide panel itself, hinges or track, and a clean handoff to the automation side if you want it motorized. The written price covers everything before work starts. Read more on the Gate Installation in Mountain View page.
Electric Gate Repair in Mountain View
Mountain View electric gate failures are usually the opener, not the gate. It’s a dead capacitor, a control board that quit, a safety edge that’s been tripping, or a photo eye knocked out of alignment by wind or a passing car. We arrive with the diagnostics to find the actual fault, replace the failed component, and test the full safety loop before we leave. No guesswork, no “replace the whole opener and see.” The full breakdown is on the Electric Gate Repair in Mountain View page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Mountain View
Our technicians train on FAAC, BFT, Linear, and Viking systems, among others, so we’re not learning your opener from the manual at your driveway. Common boards, capacitors, remotes, and safety-edge parts stay stocked on the trucks serving Mountain View, which keeps most repairs to a single visit. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Mountain View, CA
| Service | Typical range in Mountain View |
|---|---|
| Swing gate hinge replacement | $150-$400 |
| Gate post repair or replacement | $300-$900 |
| Swing gate actuator swap | $650-$1,400 |
| Control board replacement | $350-$900 |
| Safety sensor replacement | $150-$350 |
| Keypad or intercom replacement | $200-$600 |
| Slide gate track repair | $400-$1,000 |
| Full gate installation (standard swing) | $2,500-$7,000 |
| Full electric gate installation | $3,500-$9,000 |
What pushes a Mountain View job toward the top of those ranges is custom fabrication, a post that needs a new concrete footing, or an automation setup that has to be tucked tightly enough to satisfy city setback rules. The price difference is never a surprise afterward. We quote it in writing before any work starts, and if the repair fails inside 365 days, the Kingswell Guarantee brings us back to fix it at no charge.
Neighborhoods We Serve in Mountain View
We cover all of Mountain View, from the older tract streets near downtown to the newer infill builds at the edges of the city. Our usual response window for Mountain View gate work is same-day or next-day, depending on when you call and whether the gate is blocking access.
- Waverly Park
- Blossom Valley
- Rex Manor
- Cuesta Park
- Varsity Park
Service Area – Cities Near Mountain View
Our crews serve Mountain View and the surrounding Peninsula and South Bay cities from a single scheduling desk, so when you call you talk to one live person who can send someone to your street. We regularly handle gate work in Palo Alto, CA, Santa Clara, CA, Saratoga, CA, and Campbell, CA as part of our regular service area.
Serving Mountain View, CA - Our Local Coverage Area
We’re based in the Mountain View area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Mountain View
Most Mountain View calls get same-day or next-day service, especially when a gate is stuck open or closed and the home is unsecured. Call (669) 800-5686 and you’ll talk to a live person who can tell you when a tech can arrive. We give you a real arrival window, not a four-hour guessing game.
Mountain View enforces setback and height rules, and some replacements or additions need city approval before work starts. We know the local requirements and can tell you early in the conversation whether your project will need a permit or plan review. We’ll never let a job start that’s going to get flagged later.
Every repair gets a written guarantee good for 365 days. If the repair fails inside that period, we return and correct it at no charge under the 365-Day Done Right Promise. The same applies whether it’s a hinge replacement in Rex Manor or a control board swap near Cuesta Park.
Call (669) 800-5686 for a free estimate on any gate work in Mountain View. We’ll give you a written price before anything gets turned, and if we tell you a gate can be repaired instead of replaced, that’s what we’ll do.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mountain View Customers Say
"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick