Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Burbank
Gate repair in Burbank most often comes down to two things: a gate that won’t open, or a gate that won’t stay closed. Most calls we take from Burbank homeowners involve swing gates on older ranch properties, and the fix usually runs between $225 and $1,800 depending on whether we’re replacing a hinge post, retrofitting a control board, or swapping an operator that’s finally given out. Our Gate Repair team knows this city’s specific housing stock well: 1940s-1960s ranch homes with original ironwork, hillside estates in the Verdugo foothills, and the kind of hard-water corrosion that eats gate hardware faster than people expect. If your gate is stuck, sagging, or making a grinding noise, call (669) 800-5686 and you’ll reach a live person who can talk through what you’re seeing.
Why Portcullis Gate Repair San Jose Is Burbank’s Preferred Gate Repair Company
Portcullis Gate Repair has been a Kingswell company since 2008, and every job we do in Burbank carries the same four written promises: a price in writing before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. That guarantee runs 365 days. If the repair fails inside that year, we come back and fix it at no charge under the 365-Day Done Right Promise. That’s not an implication. It’s stamped on the invoice.
Burbank homeowners call us because they’ve already been burned: a technician who never showed, a quote that doubled at the door, a gate that stopped working six weeks after it was “fixed.” We don’t operate that way. Dean Prescott, who leads our Electric Gate Repair in Burbank team, has built the service around one steady rule: the written price is the price. Our technicians are background-checked and arrive in uniform, so you know exactly who’s walking up your driveway.
We answer the phone with a live person 24 hours a day, seven days a week, including holidays. No voicemail trees. No callback queues. When your gate is stuck open at 11 p.m. and your dog is eyeing the street, that matters.
Styles & brands we work with
Metal Gate Repair in Burbank
Metal gate repair in Burbank is a different animal from anywhere else because so many of the gates are original to the house: wrought iron and steel hung in the 1940s, 1950s, and 1960s, then asked to hold up under decades of sprinkler overspray and hard water from local irrigation. The most common repair we do on these older iron gates is post replacement. The hinge post, the vertical steel member that carries the entire gate’s weight, corrodes at ground level. When it fails, the gate sags, drags on the driveway, and eventually the hinges tear out. A new post with proper embedment in Burbank typically runs $500 to $1,200, including removing the old post, setting the new one in concrete, and rehanging the gate so it swings true.
Weld and Rust Repair on Older Iron Gates
We see rust on Burbank iron gates far more than people would guess, mainly because gate metal sits close to sprinkler heads and gets hit with the same hard water that leaves scale on plumbing fixtures. When rust has pitted but not fully compromised a gate frame, we grind out the affected areas, weld in new steel, and repaint. That work usually runs $200 to $600, depending on how many joints need attention. When the bottom rail is rusted through, replacement is the cheaper answer than trying to weld paper.
Gate Realignment and Hinge Replacement
When a metal gate drags or won’t latch, the cause is usually worn hinges or a post that has drifted out of plumb. On flat lots near Burbank’s Magnolia Park district, realignment is straightforward. On hillside properties above Kenneth Road, the gate’s own weight works against the hinge pins constantly. We replace hinges with heavier-duty barrel or bearing hinges sized for the gate’s actual weight. Hinge replacement with realignment runs $180 to $450 in Burbank.
Wood Gate Repair in Burbank
Wood gate repair in Burbank follows the same pattern as metal work, but the enemy here is heat and Santa Ana wind. Burbank’s hot, dry summers pull moisture out of redwood and cedar gates until they cup, warp, and crack. A wood gate that scraped fine in January may jam hard in July. Most wood gate repairs in Burbank involve replacing an individual board or rail that has warped beyond salvage, then re-squaring the frame and adjusting the hinges so the gate closes with a light touch. Expect to pay $120 to $400 for a typical board replacement and realignment on a standard six-foot wood gate.
Wood Rot and Post Replacement
Wood gate posts rot below grade, same as metal ones corrode. In Burbank, irrigation overspray and occasional heavy rain cycles accelerate that rot. A rotted post means the whole gate sags and the latch won’t line up. Replacing a wood post in concrete, with the gate rehung correctly, runs $300 to $700. We treat the new post’s buried section with wood preservative to slow the next cycle.
Warped Gate Panel Correction
Sometimes a wood gate warps because the frame was never built with a diagonal brace, or because the brace was cut too short. We can often correct moderate warp by adding or replacing that brace and letting the gate settle before reinstalling the slats. When the warp is severe, the gate panel itself is fighting you, and replacement is the honest recommendation. Straightening a warped gate panel with new bracing runs $150 to $350 in Burbank.
Trusted Brands We Service in Burbank
We carry service experience on nine major gate operator brands, including FAAC, BFT, and Linear, so the technician who pulls up for your Mighty Mule repair in Burbank or any other brand already knows the specific system on your property. In Burbank specifically, we stock a range of FAAC and Linear control boards and safety edges because those are the brands we see most often on hillside installations and ranch home retrofits. That local parts knowledge means a faster turnaround and fewer trips. If your operator is a LiftMaster, Viking, or Ghost Controls, we carry those parts too, and we don’t make you wait while we figure out what’s onboard.
Common Gate Repair Problems We See in Burbank Homes
- Stripped gears on hillside openers. On driveways above Kenneth Road with 30-degree slopes, a standard automatic gate opener strips its gears within a year because the motor is fighting gravity on every cycle. The fix is a torque limiter or a slope-rated operator, which costs $850 to $2,400 installed.
- Obsolete control boards. Gates installed in the 1940s through 1960s often ran on control boards that are no longer manufactured. Heat and age finish them off. When a board fails, the gate sticks open or closed, and the honest conversation is whether to retrofit a modern UL 325-compliant board into the existing operator or replace the operator entirely.
- Corroded hinge posts from sprinkler overspray. Hard water from Burbank irrigation hits gate metal at exactly the point where it matters most: the base of the hinge post. We replace these posts more than any other single component on older Burbank homes.
- Sagging gates that drag on steep driveways. Even a few degrees of post lean translates to a gate edge dragging several inches where the driveway rises. On hillside homes, that’s a safety issue because the gate won’t fully close or latch, and it puts constant strain on the opener.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Burbank, CA
Here’s what Burbank gate repair actually costs, in plain numbers. Hinge replacement and realignment runs $180 to $450. Metal gate welding and rust repair runs $200 to $600. A new hinge post in concrete runs $500 to $1,200 for metal, $300 to $700 for wood. Swapping a swing gate actuator, the motorized arm that physically pushes the gate open, runs $650 to $1,400 parts and labor. A full operator replacement, including the control board and safety sensors, runs $1,200 to $2,400 depending on brand and slope. Every one of these prices is quoted in writing before we turn a single bolt. Call (669) 800-5686 for a free estimate on your specific gate.
We Also Serve Cities Near Burbank
The same Gate Repair in Burbank team also covers Campbell, Boulder Creek, Saratoga, and San Jose. If you’re outside Burbank proper but still in the South Bay or Peninsula corridor, call us and we’ll confirm coverage while you’re on the phone.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Burbank
Yes, in most cases a 1960s swing gate operator can be retrofitted with modern safety photocells and a UL 325-compliant control board, as long as the motor itself is still mechanically sound. The retrofit typically costs $450 to $900 in Burbank. If the motor has stripped gears or the board is no longer available, replacement is the cheaper long-term answer. Call (669) 800-5686 and we’ll tell you which applies to your gate.
The slope is the problem. On a 30-degree driveway above Kenneth Road, a standard gate opener is fighting gravity on every open and close cycle, and the plastic or soft-metal gears inside the operator wear out in a year or less. The fix is a torque limiter or a slope-rated operator like a FAAC unit built for continuous inclined duty. Expect to pay $900 to $2,400 for that correction in Burbank, and it’s the single best money you can spend on a hillside gate.
Stand back and sight down the post. If the post is plumb but the gate still drags, the panel or hinges are the issue. If the post leans even a few degrees, that’s your sag, and no amount of hinge adjustment will fix it. A leaning post means the footing has failed, usually from corrosion or shallow embedment. Post replacement in Burbank runs $500 to $1,200. Call us and we’ll diagnose it on the first visit.
Yes. Hillside properties in Burbank fall under stricter fire-access and slope-stability requirements, and some gates require engineer-stamped post footings with deeper embedment and slope-rated operators. That’s why a standard big-box opener often fails within a year on those driveways. We routinely install FAAC and BFT operators with torque limiters and battery backup on Burbank hillside gates. A compliant hillside installation typically runs $1,800 to $3,200.
Yes, moderate warp can usually be corrected with a new diagonal brace and re-squaring the frame, which runs $150 to $350. Severe warp, where the gate no longer sits flat against the jamb, usually means the panel should be rebuilt with properly dried lumber. A full wood gate rebuild in Burbank runs $600 to $1,400 depending on size and species. The written price comes before any work starts, so you’ll know which path makes sense for your budget.
Call Portcullis Gate Repair San Jose for Burbank Gate Service
If your gate is stuck, sagging, or grinding, call (669) 800-5686. You’ll get a live person, a straight answer about what’s wrong, and a written price before any work starts. Our Burbank customers get the same Kingswell Guarantee on every job: written price, real arrival window, clean job site, and a written 365-day guarantee on the repair. Dean Prescott and the Portcullis team have been doing this since 2008, and we stand behind every gate we touch.
Written by Dean Prescott, Owner at Portcullis Gate Repair San Jose, serving Burbank since 2008.