Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Alum Rock, CA
Gate work in Alum Rock is different from anywhere else in the South Bay. The hillside streets, steep driveways, and aging mid-century gates create a specific set of problems: shifting ground throws swing gates out of alignment, hard water eats through hinges, and the fog that rolls through the canyons accelerates rust on wrought iron and chain-link. We’re Portcullis Gate Repair, a Kingswell company, and we handle gate repair, gate installation, and electric gate repair throughout Alum Rock. Call (669) 800-5686 any time and you’ll reach a live person, not a voicemail tree.
Why Alum Rock Homes Are Different
Most of the homes we service in Alum Rock were built between the 1950s and 1970s. That means original sliding and swing gates, often on long driveways that climb a grade. The lots themselves settle unevenly over the years, and when the ground shifts, a gate that once swung cleanly starts dragging or binding against the post. We see this constantly on streets like Kirk, McKee corridor neighborhoods, and the hillside pockets east of White Road.
The climate adds a second problem. Alum Rock’s warm, dry summers make metal expand; the winter rains make it contract. That cycle, year after year, works bolts loose and throws operator limits out of calibration. Add hard water from the local supply, and hinges and track wheels corrode faster than they would in softer-water cities. The result: motors strain, gates bind, and repairs that would be straightforward on flat, newer terrain take real diagnosis here.
There’s also a patchwork issue we run into all over Alum Rock. Many of these gates were automated decades after installation, often with whatever opener was available at the time. We regularly open a control box and find mismatched components: a LiftMaster arm bolted to a Viking receiver, or a generic board wired into a BFT actuator. That’s not a criticism of past work. It just means each Alum Rock job tends to be a one-of-a-kind fix, not a cookie-cutter swap.
Styles & brands we work with
Our Main Alum Rock Services
Alum Rock homeowners call us most often for two things: gate repair when a gate stops moving or won’t close properly, and electric gate repair when the automation itself fails. Here’s what each involves locally.
Gate Repair in Alum Rock
A gate that drags on the concrete, a hinge that’s worn through, a chain-link panel that’s pulled loose from the frame: these are the calls we handle every week in Alum Rock. The work usually starts with a physical inspection of the gate’s weight and swing. On hillside properties, we often find that the gate was never shimmed after the driveway settled, so the fix isn’t just a new hinge; it’s re-hanging the gate so it moves true again. We also see rust from hard water and canyon fog, which means grinding back corrosion and re-sealing before hardware fails outright. Every repair gets a written price before we start and a written 365-day guarantee when we finish. Gate Repair in Alum Rock covers the full scope and pricing.
Gate Installation in Alum Rock
New gates in Alum Rock are usually about weight. The older wrought-iron gates many homes still have are heavy, and when a homeowner replaces one, the new gate needs to be properly sized for the driveway’s slope. A gate that was measured flat works differently on a 6% grade. We handle the full run: removing the old gate, setting posts in the existing concrete or new footings, hanging the new gate, and if you want automation, wiring the operator and safety edges to match the new weight. We write the price before ordering anything, so you know the full number before a single part ships. Gate Installation in Alum Rock has the details and price ranges.
Electric Gate Repair in Alum Rock
Electric gate repair is the one Alum Rock call where the symptom often misleads. A gate that’s stopped opening halfway may look like a motor problem, but on many Alum Rock properties it’s a limit switch that’s drifted because the gate’s weight shifted with settling ground. We trace the full circuit before replacing anything: the control board, the actuator, the safety loops, the transformer. We service nine major gate-operator brands, so the tech who arrives already knows the equipment on your property. If the problem is a failed actuator, we walk you through the part options and price before any work starts. Electric Gate Repair in Alum Rock explains the repair process and typical costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Alum Rock
We provide factory-informed service on nine gate-operator brands, including FAAC, BFT, Linear, and Viking. Our local Bay Area stock gives us fast turnaround on common control boards, actuators, and safety edges. Visit our brands to see the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Alum Rock, CA
| Service | Typical range in Alum Rock |
|---|---|
| Service call fee (applies if you don’t book the repair) | $59 – $99 |
| Hinge replacement, single gate | $120 – $300 |
| Weld or bracket repair on a gate frame | $150 – $400 |
| Gate re-hang and alignment | $180 – $450 |
| Track wheel or roller replacement | $75 – $220 per wheel |
| Chain-link fabric replacement | $15 – $35 per linear foot |
| Swing-gate actuator swap (parts and labor) | $600 – $1,400 |
| Gate opener circuit board replacement | $280 – $850 |
| Full gate operator replacement, installed | $900 – $2,800 |
| New gate installation (single driveway) | $1,500 – $7,000 |
Two things push Alum Rock pricing toward the upper end of those ranges: slope and corrosion. A gate on a steep grade takes more labor to hang true, and hardware that’s been rusted by hard water and canyon fog often needs surrounding parts replaced at the same time. The number we give you is the number on the invoice, written before any work begins. No surprises after the gate is apart.
Neighborhoods We Serve in Alum Rock
We cover the entire Alum Rock area, from the flats near Story Road up into the hills. Most neighborhoods can get a technician out the same day or the next morning, depending on call load.
- East Foothills
- Little Portugal
- Mayfair
- Millbrook
- Alum Rock Village
Service Area – Cities Near Alum Rock
While this page covers Alum Rock specifically, our crews also work throughout the surrounding South Bay and East Bay. If you’re a homeowner in San Jose, CA, Burbank, CA, Fremont, CA, or Santa Clara, CA, we can schedule gate work on the same terms: written price, real arrival window, written guarantee.
Serving Alum Rock, CA - Our Local Coverage Area
We’re based in the Alum Rock area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Alum Rock
Most Alum Rock calls are scheduled same-day or next morning. We answer the phone live 24/7, and dispatch is coordinated from our San Francisco Bay Area office with crews serving Alum Rock locally. For a gate stuck open or won’t close, call (669) 800-5686 and we’ll give you a real arrival window, not a four-hour guess.
For most repair work, no; replacing hinges, actuators, or control boards on an existing gate doesn’t require a permit. A full new installation or moving a gate footprint may, depending on the specifics. We can walk you through what’s needed for your property before any work is scheduled. Call us with the details and we’ll tell you straight.
This comes up a lot in Alum Rock, where gates have outlived their original installers. We service gates from any installer, and because we carry service knowledge across nine major operator brands, we can usually identify what’s on the property and source compatible parts without replacing the whole system. The repair carries the same 365-day written guarantee we give on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Alum Rock Customers Say
"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace