Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Santa Clara, CA
We’re Portcullis Gate Repair, and we fix gates across Santa Clara, CA. Most of the gate work here is shaped by one thing: the housing stock. Tens of thousands of mid-century ranches and Eichler homes, many with original gates from the 1960s and 70s, plus newer townhome communities with ornamental aluminum. That mix means Santa Clara gate jobs rarely look like what you’d see in a newer suburb. The hardware is often original, the steel has spent decades in hard water conditions, and the fix usually calls for a retrofit rather than a drop-in replacement. If you need a gate company in Santa Clara that gives you a written price before touching a bolt, call us at (669) 800-5686.
Why Santa Clara Homes Are Different
If you live in the Old Quad or Santa Clara North, you probably already know what we’re about to say. Many of those homes still have their original redwood or hollow-metal perimeter gates, and the hardware has spent fifty or sixty years in air that carries salt off the bay and water that leaves mineral deposits behind. The hinges corrode, the latch posts wear oval, and the gate starts dragging on the walkway. That’s not a failure of the gate, it’s a failure of the original hardware spec. Nobody in 1962 anticipated sixty years of Santa Clara hard water.
The climate does something peculiar here, too. Summers are dry and mild, which sounds gentle on a gate, but the real stress comes in winter. Wet winters swell wood gates and make them stick in the frame. Then a dry spring pulls the moisture back out and the joints loosen. Over a few seasons, a wood gate that was square starts racking out of plane. On the newer side of town, townhome communities tend to have ornamental aluminum gates, which don’t swell, but they do have their own habit of shedding hinge screws when the actuator (the motorized arm that pushes the gate open) is slightly out of adjustment.
One more thing worth knowing: in the Birdland neighborhood, a lot of the original 1960s gates have custom scrollwork that isn’t made anymore. When a vertical bar rusts through or snaps, you can’t order a replacement panel from a catalog. The right fix is usually to have a technician weld in new bars to match the existing pattern. It’s a smaller job than a full replacement, and it keeps the gate looking like it belongs to the house. Homeowners in that situation tend to appreciate a company that leads with the repair option rather than a quote for a whole new gate.
Styles & brands we work with
Our Main Santa Clara Services
Most calls we get in Santa Clara fall into three buckets: repairing an existing gate, installing a new one, and repairing the electric operator that automates it. Each has its own page with local detail and pricing.
Gate Repair in Santa Clara
Gate repair here usually means one of a few things: a wood gate swollen into its frame, a steel gate with corroded hinges, a latch that no longer catches, or a gate that’s dropped and dragging. On older Santa Clara homes, we frequently replace the hinge hardware and re-shim the post rather than replace the gate itself. That’s a real cost difference, so we always show you the price before starting. When a gate has dropped, the cause is often a post that’s shifted over decades, and the fix is sometimes as simple as re-setting the hinges on new hardware. Read the full page here: Gate Repair in Santa Clara.
Gate Installation in Santa Clara
New gate installations in Santa Clara often come up for two reasons: the old gate has rotted past the point of a sensible repair, or the homeowner wants a gate where there wasn’t one before. On mid-century lots, the existing posts are usually set in concrete that’s still solid, so we can often reuse them and install a new gate for far less than a full teardown. Where the gate is brand new construction, we handle the post setting, the gate fabrication or ordering, and the hardware. All of it comes with the same written price before work starts. Details here: Gate Installation in Santa Clara.
Electric Gate Repair in Santa Clara
Electric gate problems in Santa Clara tend to follow a pattern: the opener runs but the gate doesn’t move, the gate opens partway and stops, or the keypad and remotes stop responding. Often it’s a limit switch out of adjustment, a failed capacitor, or a gear worn inside the operator. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators, so the technician who arrives already knows the system on your property. If the repair fails within a year, we come back and fix it at no charge under our 365-Day Done Right Promise. Learn more at Electric Gate Repair in Santa Clara.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Santa Clara
Our technicians carry parts for the operators most common around Santa Clara, including FAAC, BFT, Linear, and Viking. That means most repair calls are finished in one visit because the circuit board, capacitor, or limit switch is on the truck. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Santa Clara, CA
| Service | Typical range in Santa Clara |
|---|---|
| Diagnostic visit (applied to repair) | $49 – $99 |
| Gate hinge replacement (pair) | $180 – $320 |
| Latch and lock replacement | $140 – $260 |
| Wood gate re-alignment and adjustment | $160 – $300 |
| Steel gate weld repair | $150 – $350 |
| Gate wheel or roller replacement | $120 – $240 |
| Swing gate actuator swap | $450 – $850 |
| Keypad replacement | $180 – $340 |
| Safety sensor installation | $220 – $400 |
| Full gate installation (single swing, no operator) | $1,800 – $4,200 |
What pushes cost up in Santa Clara is usually post condition. On older homes, a post that’s rusted through at the base or has shifted in its footing means more labor than a simple hinge swap. Whatever the job, the price is in writing before we start, and it doesn’t change after the fact.
Neighborhoods We Serve in Santa Clara
We work across Santa Clara, from the mid-century blocks of the Old Quad to the newer townhome communities near the university. Most neighborhoods are within a 30-minute response window for scheduled work.
- Old Quad
- Santa Clara North
- Birdland
- Washington
- Mission Park
Service Area – Cities Near Santa Clara
If you’re just outside Santa Clara, we also cover San Jose, CA, Campbell, CA, Saratoga, CA, and Mountain View, CA. Call (669) 800-5686 and we’ll confirm your address is in our service area.
Serving Santa Clara, CA - Our Local Coverage Area
We’re based in the Santa Clara area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Santa Clara
For scheduled repairs, most Santa Clara appointments are set within one to three business days, and emergency gate failures are handled as quickly as possible, usually same day. A live person answers the phone around the clock, so call (669) 800-5686 and we’ll give you a real arrival window, not a four-hour guess.
For most repairs and like-for-like replacements, no permit is required. But if you’re in an HOA-governed community or doing a full installation with a change in gate height, style, or automation, your association or the city may want pre-approval. We’ll flag that for you before any work begins so there are no surprises.
Every repair comes with a written guarantee that covers parts and labor for 365 days. If the repair fails inside that window, we return and fix it at no charge. The guarantee is printed on your invoice, not buried in fine print. It’s the same standard across every Kingswell company, and this Santa Clara location is independently owned and operated but bound to that written promise.
If your gate is dragging, sticking, or refusing to open, call Portcullis Gate Repair at (669) 800-5686 for a free estimate. We’ll give you a written price, a real arrival window, and a repair backed by the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Santa Clara Customers Say
"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike