Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in San Jose, CA
A pedestrian gate in San Jose gives you everyday access without opening the full driveway gate every time. Whether you’re grabbing the mail, walking the dog, or letting a delivery person through, a well-built walk gate saves wear on your main gate operator and keeps foot traffic off the driveway. At Portcullis Gate Repair San Jose, we install, repair, and replace pedestrian gates as a focused part of our Gate Installation service. If your walk gate has gotten hard to open, sags on its hinges, or the latch won’t catch, call us at (669) 800-5686 and we’ll walk through what’s going on.
We’ve been working on San Jose gates since 2008. Our pedestrian gate work covers everything from a simple wood or steel walk gate hung on posts, to metal frame gates with magnetic locks tied into a call box or keypad system. Every job starts the same way: a written price before any work begins, a real arrival window, and a technician in uniform who knows the gate trade. And because we’re a Kingswell company, every repair or install carries the 365-Day Done Right Promise in writing. If it fails within 365 days, we come back and fix it at no charge.
The parent page for this work is our Gate Installation in San Jose page, which covers full driveway systems, operators, and electric gate work in detail. This page focuses on the walk gate specifically, which has its own set of common problems and price ranges that differ from the main driveway gate.
When You Need Pedestrian Gate
Most people don’t think about their walk gate until it stops behaving. Here’s what we see regularly in San Jose, from Willow Glen to Almaden Valley to the Rose Garden area:
- The gate sags and scrapes the ground. Post footing shifts happen in San Jose’s clay-rich soil, especially after wet winters. A gate that once swung clean now drags across the concrete or pavers.
- The latch won’t catch. Over time, hinges wear and the gate drops just enough that the latch no longer lines up with the strike plate. You push it closed, and it bounces back open.
- The gate is locked and the key is lost. We can replace the lock, rekey the existing hardware, or convert the gate to a keypad or card reader, depending on what you want.
- Rust has eaten through the frame or hinges. Steel gates near sprinklers or in shady spots in San Jose pick up moisture and corrode. We replace the hinge or the frame section rather than pretending the gate can survive another season.
- You’re adding a keypad, intercom, or magnetic lock. New hardware needs a gate that’s hung true and swings freely. We’ll check the post, hinges, and alignment before mounting anything.
- The gate is just old and tired. A simple steel or wood walk gate typically runs 15 to 25 years in San Jose’s climate. When it’s beyond patching, replacement starts to make more sense than repeated repairs.
Our Pedestrian Gate Process
Here’s how we work, step by step. This is the same process we use on every pedestrian gate job in San Jose, whether it’s a simple hinge replacement or a full walk gate install with access control:
- You call and tell us what’s happening. A live person answers the phone at (669) 800-5686, 24 hours a day, seven days a week. We ask a few questions about the gate: material, approximate age, what it’s doing, and whether it has a lock or keypad on it.
- We schedule a visit and give you a real arrival window. Not a four-hour range that turns into an all-day wait. You’ll know who’s coming and when. Our technicians are background-checked and arrive in uniform.
- The technician inspects the gate and explains what they find. We show you the wear, the rust, the loose post, or the misaligned latch. We use the trade terms and then explain them in plain words: the stile is the vertical frame piece, the hinge plate is what bolts to the post, the strike is where the latch catches.
- You get a written price before any work starts. No surprise add-ons after the gate is already detached from its hinges. The price covers parts and labor, in writing.
- We complete the work, clean up, and test the gate with you. We open and close it multiple times, adjust the latch so it catches every time, and make sure the swing is smooth. Your job site is left cleaner than we found it.
- You get the Kingswell Guarantee in writing. Every repair and install carries a 365-Day Done Right Promise, stamped on your invoice. If it fails within that year, we return and fix it at no charge.
Pedestrian Gate Pricing in San Jose
Pedestrian gate work in San Jose runs a wide range because so much depends on what we find when we open things up. Here are honest ranges based on what we typically see across the city:
- Hinge replacement on a standard steel or wood walk gate: $180 – $420. This includes removing the old hinges, replacing with heavy-duty hardware, realigning the gate, and testing the swing. Price varies by gate weight and how many hinges need replacing.
- Latch or lock replacement: $120 – $340. A basic gravity latch costs less; a keyed lockset or keypad-compatible latch costs more. If the frame is rusted around the latch, we may need to weld a new plate or patch the frame, which pushes the total toward the upper end.
- Sag adjustment and realignment: $150 – $300. This covers repositioning the gate on its hinges, correcting the post alignment where possible, and adjusting the latch so it catches cleanly.
- Full pedestrian gate replacement with standard steel or aluminum frame: $900 – $2,800. This includes removing the old gate, setting a new frame or gate on existing posts, new hinges and latch, and testing. Powder-coated aluminum runs higher than painted steel. Custom sizes or ornamental designs increase the price.
- Wood pedestrian gate replacement (cedar or redwood, standard size): $700 – $1,900. Includes materials, hardware, and installation. Redwood is common in San Jose yards and holds up well here.
- Access control retrofit (keypad, card reader, or magnetic lock on a pedestrian gate): $500 – $1,800. The gate has to hang true and swing freely for these to last. We install hardware from brands like Linear and FAAC depending on what your existing system uses.
What affects the price most? The condition of the posts. If the post is rotted, rusted through, or set in loose soil, we have to address that before any gate work makes sense. Gate weight matters too: a solid steel gate needs heavier hinges and takes longer to hang than a light aluminum one.
Every pedestrian gate estimate from us is free. You get the written price before any work starts, and that price doesn’t change unless we find something hidden and you approve the additional work first. Call (669) 800-5686 and we’ll schedule a visit.
Pedestrian Gate vs. Driveway Gate: What’s Different
Walk gates and driveway gates fail differently. A driveway gate relies on an actuator, the motorized arm that physically pushes the gate open, and a control board that tells it when to move. A pedestrian gate relies on hinges, a latch, and whatever locking hardware you’ve got. That means the Gate Installation work we do on a driveway system doesn’t automatically transfer to your walk gate, and vice versa.
We service both, and many San Jose homes have a pedestrian gate built into the same fence line as the driveway gate. That’s common in the Berryessa and Evergreen neighborhoods, where homes have wider frontage and separate walk access to the door. When we’re out for a driveway gate repair, we’ll often spot a walk gate that’s ten minutes from failing, and we’ll tell you about it before it leaves you locked out at 7 a.m.
Kingswell Guarantee on Every Pedestrian Gate
Portcullis Gate Repair San Jose is an independently owned and operated Kingswell company. That matters because it binds us to the same four promises every Kingswell location makes on every job:
- A written price before any work starts
- A real arrival window
- A clean job site
- A written guarantee on the repair
The guarantee runs 365 days from the date of the repair, printed on your invoice. If the repair fails inside that year, you get a free return visit and we make it right. That’s the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
Areas We Serve in San Jose
We work across San Jose, including Willow Glen, Rose Garden, Almaden Valley, Cambrian, Berryessa, Evergreen, Japantown, and downtown. Pedestrian gate work is the same everywhere in the city, but the terrain and soil vary: hillside properties in Almaden see more post shifting, while older central San Jose homes often have original wood gates from the 1960s and 1970s that need full replacement instead of patch repairs.
If you’re outside San Jose proper, we also serve nearby communities like Santa Clara, Campbell, Los Gatos, and Milpitas. Our parent page on Gate Installation in San Jose covers our full service area for driveway gates and operators.
FAQs – Pedestrian Gate
How much does it cost to replace a pedestrian gate in San Jose?
A standard pedestrian gate replacement in San Jose typically runs $900 – $2,800 for steel or aluminum, and $700 – $1,900 for wood, including removal of the old gate, hardware, and installation. The final price depends on gate size, material, and the condition of the existing posts. Call (669) 800-5686 for a free written estimate on your specific gate.
Can you fix a pedestrian gate the same day?
Yes, in most cases. Hinge replacements, latch repairs, and realignment work typically get completed in a single visit. If we need to order a custom gate or specific hardware like a BFT or Viking access control panel, there may be a short lead time. Call us and we’ll tell you what to expect before scheduling.
Is it cheaper to repair or replace a pedestrian gate?
If the frame is solid and the posts are sound, repair is almost always cheaper, usually $150 – $420 for common fixes like hinges or latches. If rust has compromised the frame or the post is failing underground, replacement often costs less over five years than repeated patch repairs. We’ll show you the damage and give you both options in writing.
Can you add a keypad or magnetic lock to my existing pedestrian gate?
Yes, but the gate has to be in good condition first. We service a range of access control hardware and regularly retrofit pedestrian gates with Linear keypads, magnetic locks, and card readers. The gate must hang true and swing freely or the hardware will fail prematurely. Call (669) 800-5686 and we’ll assess your gate.
Call Portcullis Gate Repair San Jose
If your pedestrian gate is sagging, sticking, or the latch won’t catch, call us at (669) 800-5686. You’ll get a live person on the phone, a written price before any work starts, and the 365-Day Done Right Promise in writing. We’ve been fixing and installing gates in San Jose since 2008, and we stand behind every job we do.
Written by Dean Prescott, Owner at Portcullis Gate Repair San Jose, serving San Jose.