Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with





See the difference
Before
After
Before
After
Before
AfterLock Repair in San Jose, CA
Lock repair in San Jose typically runs $95 to $280 for most residential gate lock fixes, and we complete the majority of them in a single visit. The exact price depends on whether you’re dealing with a keypad failure, a stuck deadbolt, a misaligned strike plate, or a lock that needs full replacement. If your gate won’t lock, won’t unlock, or the key turns but nothing catches, call Portcullis Gate Repair San Jose at (669) 800-5686 and we’ll give you a written price before any work begins.
We’ve been doing Gate Repair in San Jose since 2008, and lock problems are among the most common calls we get. Most people don’t realize a gate lock isn’t just one piece. It’s a lock body, a strike, sometimes an electric strike, a keypad, a transformer, and wiring that runs through or under the gate. When one part fails, the whole system stops working. Our technicians diagnose the actual failed part and replace only what’s needed, not the entire assembly.
Dean Prescott owns Portcullis Gate Repair San Jose, and he’s built the business around a simple idea: write the price down before touching the gate, show up when we say we will, and put the guarantee on paper. That’s the Kingswell Way, and it applies to every lock repair we do.
Key Takeaways for San Jose Homeowners
- Most gate lock repairs in San Jose cost between $95 and $280 and are done same-day.
- The lock body, strike plate, keypad, and wiring are separate parts – we replace only what failed.
- Every repair includes a written price before work starts and a written 365-Day Done Right Promise.
- Calls are answered by a live person 24/7, including weekends and holidays.
- We service locks on gates with FAAC, BFT, and Viking operators, among others.
When You Need Lock Repair
Not every lock problem looks dramatic. Some start small and get worse over weeks. Here’s what San Jose homeowners call us about most often:
- The key turns but the gate doesn’t unlock. This usually means the tailpiece inside the lock body has snapped or slipped. It’s a common issue on older swing gates in the Rose Garden and Willow Glen neighborhoods where gates have been in service for 15-plus years.
- The keypad accepts the code but the lock doesn’t release. The keypad may be fine, while the electric strike or the wiring between them has failed. We see this frequently in Almaden Valley, where sprinkler systems and soil moisture can corrode low-voltage wiring over time.
- The gate won’t stay latched. A misaligned strike plate or a sagging gate is usually the culprit. In San Jose’s clay soil, gate posts shift with wet winters and dry summers, pulling the lock out of alignment.
- The deadbolt is jammed or stuck. Dirt, rust, or a bent latch can seize the bolt. This is especially common on gates near busy streets where road dust kicks up constantly.
- The lock works manually but not with the keypad or remote. This points to the electric strike, control board, or power supply rather than the mechanical lock itself.
- You’ve lost keys or a previous owner had the gate keyed differently. We can rekey the lock cylinder or install new locks, whichever makes more sense for your situation.
Our Lock Repair Process
You’ll know exactly what’s happening at every step. Here’s how we handle a lock repair call in San Jose:
- You call and talk to a person. No phone trees. A live dispatcher answers 24/7, takes your address, and asks a few questions about what the lock is doing.
- We give you a real arrival window. Not “sometime between 8 and 5.” We commit to a window and show up inside it. If you have a gate that won’t lock at all, we treat it as a priority call.
- The technician inspects the lock, strike, keypad, and wiring. They diagnose the specific failed part and explain it in plain language. If the lock body’s tailpiece snapped, they’ll tell you that and show you the broken part.
- You get a written price before any work starts. That price includes parts, labor, and tax. It doesn’t change at the door.
- We complete the repair and test it thoroughly. The gate gets opened, closed, locked, and unlocked multiple times. If you have a keypad, we test the code entry. If you have a remote, we test that too.
- You get the Kingswell Guarantee in writing. The invoice states the 365-Day Done Right Promise: if the repair fails within 365 days, we come back and fix it at no charge.
Lock Repair Pricing in San Jose
Here’s what you can expect to pay for common lock repairs in San Jose. These are honest ranges based on what we’ve charged across the city over the past several years:
| Repair Type | Typical Cost in San Jose |
|---|---|
| Lock realignment / strike plate adjustment | $95 – $140 |
| Lock cylinder replacement or rekey | $85 – $150 |
| Keypad replacement | $120 – $220 |
| Electric strike replacement | $150 – $260 |
| Full lock assembly replacement on a swing gate | $180 – $280 |
| Lock repair on a gate with a BFT or FAAC operator (includes operator integration check) | $130 – $240 |
What shifts the price is the lock type, whether we’re working with an electric strike or a purely mechanical lock, and how much wiring or adjustment is needed. A lock on a gate with a Viking operator that’s integrated with a keypad and remote costs more to repair than a basic mechanical deadbolt because there are more failure points to test, often requiring automatic gate repair expertise.
Every estimate is free. Call (669) 800-5686, tell us what the lock is doing, and we’ll give you a straight price range over the phone. The written price you get before work starts is the price you pay.
Lock Types We Repair in San Jose
We work on the full range of gate locks found across San Jose, from old-school mechanical deadbolts on single-swing gates in Japantown to integrated electric locks on newer systems in Evergreen and Berryessa:
- Mechanical deadbolts and latch locks. The simplest type. Common problems are bent latches, worn cylinders, and misaligned strikes.
- Electric strikes. The lock body stays mechanical, but an electric strike releases the latch when a keypad code or remote signal comes in. These fail more often because they have both mechanical and electrical parts.
- Magnetic locks (maglocks). Common on commercial gates and some high-end residential installations in San Jose. They hold the gate shut with an electromagnet and release when power is cut or a signal is sent.
- Keypad-integrated lock systems. These pair a keypad with an electric strike or maglock. Failures can be in the keypad, the power supply, the strike, or the wiring connecting them all.
- Locks on FAAC, BFT, and Viking operator systems. These operators often control an electric lock as part of the gate automation. We know how these specific systems integrate and where the lock signal originates.
Why San Jose Homeowners Call Portcullis
Most of our lock repair customers have already dealt with another gate company. They called, left a voicemail, and waited three days. Or a tech showed up, took the gate apart, and doubled the price. That doesn’t happen with us. Here’s what you can expect instead:
- A live person answers the phone. 24 hours a day, 7 days a week. Holidays included. If your gate won’t lock at 11 p.m., you talk to a person at 11 p.m.
- Technicians are background-checked and uniformed. You’ll know who’s coming to your property and what they look like before the truck pulls up.
- The price is written down before any work starts. Always. No exceptions. If the scope changes during the repair, the written price is updated and you approve it before we continue.
- The 365-Day Done Right Promise covers every lock repair. If the lock fails again within a year, we return and fix it for free. That promise is stamped on your invoice.
- We don’t upsell you a full gate replacement unless it actually makes sense. A broken lock body doesn’t require a new gate. We replace the lock.
Portcullis Gate Repair San Jose is an independently owned Kingswell location. That means we’re local to San Jose, but held to the Kingswell Guarantee on every job: a written price, a real arrival window, a clean job site, and a written guarantee on the repair. Dean Prescott has operated this location since 2008, and the standard hasn’t changed.
FAQs – Lock Repair
How much does gate lock repair cost in San Jose?
Gate lock repair in San Jose typically costs $95 to $280 depending on the lock type, the part that failed, and whether electric components like keypads or strikes are involved. A simple strike plate realignment runs about $95 to $140, while a full lock assembly replacement on a swing gate can reach $280. Call (669) 800-5686 for a free estimate and a written price before any work begins.
Can you fix a gate lock the same day?
In most cases, yes. We keep common lock parts on our trucks, and our San Jose technicians complete the majority of lock repairs in a single visit. If your gate won’t lock at all, we treat it as a priority call. Talk to a live dispatcher at (669) 800-5686 to get a real arrival window.
Is it cheaper to repair or replace a gate lock?
Repairing a lock is almost always cheaper than replacing it, and most lock issues in San Jose are repairable. A snapped tailpiece, a gate realignment issue, or a failed keypad can all be repaired or swapped individually. Full replacement only makes sense when the lock body is corroded through or the lock is so old that replacement parts are no longer available. We’ll show you the failed part and give you a written price either way.
Do you work on locks for automatic gate openers?
Yes. We repair locks integrated with automatic gate systems, including FAAC, BFT, Linear, and Viking operators, among others. The lock on an automatic gate often works in sequence with the operator, so a technician needs to understand both systems to diagnose the failure correctly, including weld & rust repair when corrosion affects the mechanism. Our techs know these operator brands and how their lock integration works. Call (669) 800-5686 to schedule a visit.
Contact Portcullis Gate Repair San Jose
If your gate lock is acting up, don’t wait until it fails completely. A gate that won’t lock leaves your property unsecured. A gate that won’t unlock keeps you from getting in. Either way, we can help. Call Portcullis Gate Repair San Jose at (669) 800-5686 for a free estimate. You’ll talk to a live person, get a real arrival window, and receive a written price before any work starts. That’s how we’ve done it since 2008, and that’s how we’ll do it for you.
Written by Dean Prescott, Owner at Portcullis Gate Repair San Jose, serving San Jose.